Shenzhen AND Technologies Co., Ltd.
Main products:GSM GPRS Module,GPS Module,PCB,PCBA,IC
Products
Contact Us
  • Contact Person : Ms. Wu Carmen
  • Company Name : Shenzhen AND Technologies Co., Ltd.
  • Tel : 86-755-28099797
  • Fax : 86-755-28099798
  • Address : Guangdong,Shenzhen,B6 Huatongyuan Logistics Center,No.2 Minzhi Road,Baoan District
  • Country/Region : China
  • Zip : 518100

High Gain GPS Glonass combo antenna with SMA connector

High Gain GPS Glonass combo antenna with SMA connector
Product Detailed
1)High Gain GPS Glonass combo antenna with high quality 2)Car/Auto/Vehicle/Navigation/Active Antenna

Car antenna Center Frequency 1575.42 MHz Band Width 5 MHz LNA Gain 29 dB Noise Figure 1.5 dB

No.

Item

Specifications

Post Environmental Tolerance

1

Center Frequency(MHz)

1575.42 MHz

±3 MHz

2

Band Width(MHz)

±5 MHz

±1 MHz

3

V.S.W.R(in BW )

1.5:1

4

Gain(Zenith)

3 dB

±0.5 dB

5

Polarization

RHCP

6

Impedance

50 Ω

3.2 LNA/Filter

Form 2

No.

Item

Specifications

Post Environmental Tolerance

1

LNA Gain

28±2 dB

±2.5 dB

2

Noise Figure

1.5 dB

3

Filter Out Band Attenuation

12dB  Min  f0+50MHz

16dB  Min  f0-50MHz

±1.0 dB

4

DC Voltage

2.2~5 V

5

DC Current

5~15 mA

Post Environmental Tolerance (Refer to the form 1 )

Condition:Temperature range 25±3°C

Relative Humidity range 55~75%RH

Operating Temperature range -40°C~+85°C

Storage Temperature range -40°C~+100°C

5.1 Moisture Proof

The device should satisfy the electrical characteristics specified in form 1 after exposed to the temperature 40±2°Cand the relative humidity 90~95% RH for 96 hours and 1~2 hours recovery time under normal condition.

5.2 Vibration Resist

The device should satisfy the electrical characteristics specified in form 1 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions.

5.3 Drop Shock

The device should satisfy the electrical characteristics specified in form 1 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device.

5.4 High Temperature Endurance

The device should satisfy the electrical characteristics specified in form 1 after exposed to temperature 80±5°Cfor 24±2 hours and 1~2 hours recovery time under normal temperature.

5.5 Low Temperature Endurance

The device should also satisfy the electrical characteristics specified in form 1 after exposed to the temperature -40°C±5°Cfor 24±2 hours and to 2 hours recovery time under normal temperature.

5.6 Temperature Cycle Test

The device should also satisfy the electrical characteristics specified in form 1 after exposed to the low temperature -25°C and high temperature +85°C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature.

No.

Item

Specification

1

Cable

RG174 3m/5m or others

2

Connector

SMB

3

Plastic Housing

Black

4

Mounting

Magnet/Adhesive

High Gain GPS Glonass combo antenna with SMA connector



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.